Two helpers for new pilots
Once you can fly the basics, two features make life much easier: headless mode helps when you lose track of which way the drone is facing, and trim fixes a drone that won’t hold still.Headless mode
Normally, “forward” means the direction the drone’s nose is pointing. If the drone spins around, its “forward” now points back at you - which gets confusing fast. Headless mode fixes this: “forward” is always away from you, the pilot, no matter which way the drone faces.
In headless mode, 'forward' is always away from you - not wherever the drone's nose points
Normal vs headless mode - and how the Return button brings the drone home
Turn it on
Press the Headless Mode button. The controller beeps once and the drone’s light flashes slowly.
Fly relative to yourself
Now pushing the right stick “forward” always sends the drone away from you, and “back” brings it toward you - regardless of the drone’s rotation.
Turn it off
Press the button again. The controller beeps twice and the light returns to steady.
While in headless mode, the Return button sends the drone back toward where it took off. You may need to nudge the sticks to guide it home.
Trim: fixing drift
A well-behaved drone should hover in one spot. If yours slowly creeps in a direction even when you’re not touching the sticks, use the trim buttons to correct it. Trim nudges the drone’s balance the opposite way.
Trim the opposite way to the drift - in small taps
Hover and watch
Bring the drone to a steady hover and notice which way it drifts.
Trim the opposite way
Tap the trim button pointing against the drift. Make small adjustments and re-check.
Repeat until steady
A few small taps usually gets a clean, stable hover.
You can turn headless mode on and off, explain how it changes “forward,” and use trim to stop a drifting hover.