> ## Documentation Index
> Fetch the complete documentation index at: https://stem-docs.intellectualpoint.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Spool holder install

> Assemble the filament spool holder and mount it to the top rail.

## Installing the spool holder

The **spool holder** carries your filament spool above the printer and lets it unwind smoothly into the feeder. You assemble the tube onto its bracket, then mount it to the top rail facing the back.

<iframe src="https://iframe.mediadelivery.net/embed/697805/0a5de247-ceca-49d1-9538-84a4c903668d?autoplay=false&preload=false" style={{ width: "100%", aspectRatio: "16/9", border: "none" }} allow="encrypted-media; picture-in-picture" allowFullScreen />

<Info>
  For this step you need the **last two M5x8 screws**, **two M5 T-nuts**, and the **number 4 Allen wrench**.
</Info>

<Frame caption="Step 11: assembling and mounting the spool holder">
  <img src="https://mintcdn.com/intellectualpoint/O5GrjWnEycOQFaAQ/images/intro3d/assembly-step-11.png?fit=max&auto=format&n=O5GrjWnEycOQFaAQ&q=85&s=e347ebb431fa908f2030f0e34e7c095a" alt="Diagram showing the spool holder tube assembled and mounted to the top rail" width="1930" height="1084" data-path="images/intro3d/assembly-step-11.png" />
</Frame>

## Step-by-step

<Steps>
  <Step title="Assemble the tube and bracket">
    Twist the removable cap off the tube (lefty-loosey), pass the tube through the large hole in the metal bracket, and twist the cap back on to lock it in place - it should click.
  </Step>

  <Step title="Prepare the screws and T-nuts">
    Thread an **M5x8** screw into each of the two holes on the bottom of the bracket, then start an **M5 T-nut** onto each screw. Leave them **barely snug** so the T-nuts can still move. Orient the T-nuts **horizontal**.
  </Step>

  <Step title="Mount to the top rail">
    Set the bracket on the top rail and flip the T-nuts into the rail slot. The bracket should sit flush, facing toward the **back** of the printer.
  </Step>

  <Step title="Tighten firmly">
    Tighten both screws with the number 4 Allen wrench until the T-nuts grip the rail hard. Wiggle it - it should be rock solid.
  </Step>
</Steps>

<Warning>
  Tighten the spool holder **very firmly**. If it is loose, a full filament spool can fall mid-print. You should be able to lift the printer by the holder.
</Warning>

<Check>
  The tube is locked in the bracket, the holder is mounted solidly to the top rail facing the back, and it does not wiggle.
</Check>

## Up next

Now you connect all the **cables** and install the PTFE feed tube.